6 Tricks to Fix Brother Printer Not Connecting To WiFi

brother printer wifi setup

Fix Brother Printer Not Connecting To WiFi

Brother Printers are your best bet when looking for a domestic or commercial printing machine. These machines are not only agile but extremely user-friendly and can help you get the maximum productivity out easily. You can connect a brother printer to your wifi network and enjoy wireless printing anytime. If you have a brother printer already at your home or in your office and are struggling with connecting it to the wifi network, this blog will walk you through the steps to troubleshoot the same in no time. Learn easy steps to resolve Brother Printer not connecting to WiFi issue.

How to Connect My Brother Printer to Wifi via Setup Wizard?

Follow our 11 steps below to setup your Brother printer to connect to an internet-connected network. Before you can configure your wireless network, it is essential to be aware of the password and network name of the wireless network. It is typically located in the back of the modem.

1. Make sure you connect to your Brother printing device to the power outlet , then switch it on.

2. Click”Menu” or press the “Menu” button.

3. Use the “Up”/”Down” Arrow key for selecting the desired network. Then click “Ok”.

4. Then you need to click the “Up”/”Down” button to select “WLAN” and then press “Ok”.

5. Similar to that, choose similarly, select the “Setup Wizard” using the “Up”/”Down” Arrow key, and then hit “Ok”.

6. After it appears that the “Enable WLAN command” appears Click to enable your wireless connection.

7. Then, you must sit and wait. The Brother printer will begin searching the network for you and show the list of SSIDs available.

8. Then, press the “Up”/”Down” Arrow keys for selecting an “SSID” of your choice and then hit “Ok”.

9. Perform at least one of the actions:

If you’re using an encryption and authentication method, you must enter”Network key” and press “Network key”. Enter”wEP” in the “WEP key” and press “Ok”. Select “Yes” to apply the settings or “No” to cancel.

If you’re employing”Open System” for authentication, then you should select “Open System” for authentication Your encryption method should have the setting of “None”. Therefore, you can simply go into the following step.

10. If you “WLAN access point/router” supports WPS then the warning “WPS is available” will be displayed. Use the “Up” arrow key to connect your device via the wireless auto-mode. Press the “WPS” button on your “WLAN access point/router” and hit”Up” twice “Up” arrow key twice.

Resolving Brother Printer Not Connecting to WiFi

When resolving issues with the wifi connectivity, here are some tricks you can keep in mind:

  • Reduce the Distance between devices
  • Check the Internet settings
  • Check the WiFi Password
  • Update Printer Firmware
  • Restart your printer and router
  • Use the WPS method instead

Reduce the distance between devices

In connecting the Brother Printer to the wireless network at home, you must make sure that they are able to communicate. It’s not worth setting up devices if they’re not within the range.

The WiFi signals that come from your router operate within a specific limit. If you put your printer outside the range, it will not be able to connect.

To ensure a seamless WiFi connection, ensure that you put the printer in the range of maximum signal strength for your WiFi network.

After that your printer is in the range, it will be able to detect its WiFi connection and be able to connect to the network effortlessly.

Furthermore, ensure that there is no hindrance/obstruction between the router and the printer. Tanks that contain water, such as aquariums, and electrical devices like microwaves, radio equipment such as wireless phones, and others. could cause problems in signal propagation. It is important to ensure that the path for signals is clear so that you don’t end up having to deal with Brother Printer Not Connecting to WiFi issues.

Verify the Internet settings

If the settings for the internet, such as the network encryption protocol and SSID you’re using is not correct and you are not using the correct settings, you won’t be able to connect the printer to the router’s network. Before proceeding with your Brother Printer WiFi setup , ensure that you have all the necessary information regarding the network settings of your router. These include the SSID password, SSID, and the type of encryption for your network. These can be obtained by logging into the router configuration wizard.

Once you’ve found the necessary information, you can utilize the Brother Printer Setup Utility to connect to the WiFi network.

Prior to beginning your installation, check that the SSID for the router is accessible and that it doesn’t use MAC Filtering as a security protocol. In the event that it is, it’s recommended to disable the same feature and connect your printer to the Brother.

Check the WiFi Password

When you connect to connect your Brother Printer to WiFi the wizard for setup will ask you to verify the connection. It can be done by entering the network password when you are asked. However, if you’re using the wrong network password there will be problems connecting to the same network.

If you’re getting the Brother Printer not connecting to WiFi error when making connections with the WiFi network on your computer You can verify if you are using your correct password.

Make sure you use appropriate sequence letters and characters in the correct order for the case. If you’ve lost your password to WiFi You can reset it by logging into your router’s configuration wizard, and then complete the process of connecting.

Update Printer Firmware

The firmware for the printer is the program that allows the printer to complete simple and complex tasks with ease. If the firmware is out of date, you may experience issues with the basic functions.

It is possible to update it by going to the official Brother support website for printers and downloading the current firmware file.

When your firmware gets upgraded be sure to switch off your Brother printer’s setup or disconnect your printer from power outlets. This could cause the printer’s firmware to fail or create additional problems.

Restart your printer and router

It is possible to restart the router’s wifi and printer to determine the possibility of device cache issues affecting issues with the Brother Printer not connecting to WiFi .

Restarting will clear cache memory and help the device start from scratch so the wifi setup is completed.

It is also possible to switch off the power to both your Brother device and printer to free up the memory of your device and improve performance.

Make use of the WPS method instead

If you’re unsure regarding the password for the WiFi connection, you can connect your printer with the WPS method. If your router is compatible with the WPS function then you can utilize this method to establish an internet connection.

This method is more simple to connect using the press of one button. The WPS method makes use of two connecting methods.

There is the traditional Push-button technique and another method is called the WPS PIN procedure. Based on your preferences you can choose any of the methods of connection.

Need help resolving Brother Printer Not connecting to WiFi or brother printer not printing ? Connect with us now!

 

LEAVE A REPLY

Please enter your comment!
Please enter your name here