Concrete cutting is no easy task. It doesn’t matter where in the world you do it or what concrete cutter you use. If you are going to be carrying out a concrete project on your own and without professional supervision, you can bet that you’d be in for quite a lot of work.
This doesn’t mean carrying out DIY concrete cutting is an impossible task, however. In fact, while we advise that you employ professionals for all concrete cutting Campbelltown projects, you can still get some minor tasks done yourself. Since guidance is still needed to get the job done right, below are some tips you need to know.
Always use the right concrete cutter
Concrete cutting is not a task to undertake with just any kind of tool. In fact, there are just as many concrete cutters available for concrete cutting tasks as there are different reasons for cutting concrete. Some cutters are designed specifically to make certain kinds of cuts or reach certain depths. Others are better suited for cutting specific materials. When carrying out DIY concrete cutting in Campbelltown, it is important to consult concrete cutting experts near you to find out what kind of concrete cutter would be better suited for the task at hand.
Select the Right Blade for the Job
When carrying out concrete cutting, you not only need to get the right concrete cutter but also the right blade for the job. Depending on the material to be cut, the kind of blade to be used would vary, even if you would be using the same cutter. Take for example you are looking to cut a number of blocks. For a concrete cutting project like that, you could simply use a regular concrete cutting blade. When cutting much harder materials like asphalt or rocks though, diamond-tipped blades are the more appropriate blades for the job.
Mark before Making Cuts
One mistake people make often during concrete cutting in Campbelltown is to make cuts without first marking where the cuts should be made. Do not be one of these people. Before beginning your concrete cutting projects, clearly mark where you’d be making your cuts with chalk. This helps you visualise where you would be making cuts, helping you make more accurate cuts, and thus, leaving less room for mistakes. You really don’t want a situation where you’d have to start a concrete cutting project all over again because you make the right cuts in the wrong place.
Read about – False ceiling contractor
Use a Guide Board
Most of the time, simply marking the portion to be cut with chalk or paint is not enough. You’d need to use guide boards too. Basically, guide boards are straight, smooth boards installed on both sides of the marking to ensure the concrete cutter doesn’t stray off the marked part. When installing the guide boards, ensure that they are secured properly and are straight with the marked portion right in the centre. Maintain a firm grip on your concrete cutter as you make cuts withing the guide board so as to make sure to keep cutting in the straight path directed by the chalk and guide boards.
Concrete cutting can be a really intimidating task. Especially when you have such a large portion to cut. Sometimes, this fact makes you want to cut as much as possible, as fast as possible. Don’t do that. That’s a very easy way for things to go wrong. Instead, start small. Start with short, shallow cuts first to get a proper grasp on how to handle the concrete cutter. When you get a hang on things, you can then start making deeper and longer cuts.
Don’t force the Cutting Process
Another mistake people make frequently during DIY concrete cutting projects is to force the concrete cutter. The fact is that this doesn’t really do any good. In fact, it only increases the possibility of accidents happening. So don’t force the process. Instead, let the blade do its work. All you need do is guide it down the right part.
Take the Dust into Account
One major difference between concrete cutting experts and most individuals who carry out DIY concrete cutting is that experts already know what to expect from concrete cutting. One of such things experts expect is the dust, and believe it when we say, there’s going to be quite some of it depending on what cutting method you would be using. All that dust is not good for your health (or anyone else’s for that matter). This is why you need to pay serious attention to it.
As stated earlier, the dust problem is dependant on what cutting method you use. If you are going to be using the wet cutting method, you need not worry about the dust at all. With this method, the blade of the Concrete Cutter Campbelltown is constantly kept wet automatically to cool them down during the cutting process. This wetting effect also wets the surface to be cut, leading to little to no dust.
Dry cutting on the other had has no such technology, thus, you’d need to manually take care of the dust. When carrying out dry cutting, always ensure to use a nose mask as well as goggles to protect your eyes and nose. You should also manually wet the ground to prevent the dust from poluting the environment.