Breathing Air Systems – Compressed Air Suitable For Breathing

Looking for Breathing Air Systems? IATT offer a full range of breathing air packs & systems which deliver pure, clean breathing air. Air systems are available at low cost throughout the UK

We provide a range of breathing air systems at IATT, with clean compressed air suitable for breathing and medical applications. These are vital in maintaining a healthy environment for workers and users.

IATT offer a full range of Breathing Air Systems and Packs that deliver pure, clean breathing air. The breathing air systems we provide range from 2 man stations to full medical air treatment packages. All equipment is designed and manufactured in line with the latest BS, HTM and European Pharmacopeia standards. All systems are installed and validated in accordance with current legislation and have remote/additional alarms and an optional electronic PC management interface for added peace of mind.

Industrial oxygen generators separate oxygen from compressed air using a special selective adsorptive technology, also known as PSA. There is a presence of oxygen within this compressed air of 21%, (with 79% nitrogen) which is allowed to flow through a zeolite molecular sieve. This maintains nitrogen which results in high purity oxygen at industrial and commercial gas production sites.

The PSA process detailed above is similar to that of a nitrogen generator, however the adsorptive material inside the sieve isn’t made of carbon as is the case with nitrogen, but is instead comprised of zeolite. A unique aspect of zeolite and the reason it is ideal for oxygen generators is due to its ability to discharge retained nitrogen gas when the pressure within the generator is reduced. In essence, this makes it relatively simple to regenerator the medium for a further cycle of oxygen generation with an industrial oxygen generator.

We Supply a wide variety of lab gas generators & laboratory nitrogen generators for gases such as hydrogen and nitrogen. Nitrogen generators are available at low cost throughout the UK

High Purity Hydrogen Lab Gas Generators

The IATT AiroGen® Laboratory Generator rangeoffers a safe and simple to use efficient technology for high purity H2, N2 and ZERO AIR analytical grade laboratory gases. The technology makes the gas cylinder redundant and the high purity gases you require available as and when you need them. IATT AiroGen® Lab GasGenerators offer a module design and can also be stacked to meet compact storage requirements, this makes them perfect for usage within multiple generation applications.

What is Adsorption?

To fully understand lab gas generators and swing adsorption technology, we must first explore what adsorption is. Adsorption refers to a gas application such as nitrogen generation, and is the accumulation of molecules of oxygen and other trace gases.

This accumulation is used to form a thin film on the surface of a specifically selected solid, such as carbon, by intermolecular forces. The adsorption process involves a mass transfer and differs from absorption, where a specific fluid is dissolved by a liquid or solid. Adsorption is a reversible process and facilitates the constant use of the system to generate nitrogen on a sustainable scale for commercial use.

Nitrogen Generators and Nitrogen Generation Explained

Now, with the definition out of the way, let’s explore how nitrogen generators and the process of nitrogen generation work. PSA Nitrogen is generated the process of adsorption, where the adsorptive properties of specific media, such as a Carbon Molecular Sieve, are used. Oxygen and other trace gasses found through the process are consequently adsorbed onto the adsorptive media at varying portions, depending on the system pressure present. In turn, the nitrogen passes through the media because of the fact that its molecular structure is too large to infiltrate the fine permeability of the adsorptive media in question.

The system utilised within our lab gas nitrogen generators and the generationprocess in general is with two pressurisedtowers to contain the adsorptive media. Here, the clean dry compressed air enters at the bottom of one of the towers where oxygen, carbon dioxide, moisture, some hydrocarbons, and trace gases are adsorbed. Nitrogen then passes through the adsorbent media bed into a buffer tank, prior to the outlet where it is subject to additional filtration and pushedon for use in the analytic application. After a predetermined time which isdependant on the purity of nitrogen required, the tower switches to regenerative mode and streams the pressurised compressed air into the second tower.

This is where the term Pressure Swing originates and is put into action.

Then, the process begins again. The first tower finally depressurises, and the adsorbed oxygen and other trace gases are distributedand expended to atmosphere.

The AiroGen® Lab Gas GeneratorsRange includes:
PSA LC/MS NITROGEN GENERATORS
DS-PSA NITROGEN GENERATORS
HIGH PRESSURE NITROGEN GENERATORS
MP-AES NITROGEN/AIR GENERATORS
HIGH PURITY NITROGEN GENERATORS
MEMBRANE NITROGEN GENERATORS
NITROGEN GENERATORS FOR HIGH FLOW

IATT AiroGen® Zero Air generators utilise Catalytic Reactor technology to generate high purity air that is free of moisture and hydrocarbons.
The Various Applications for an Industrial Oxygen Generator
There are multiple functions and applications for PSA oxygen generators on industrial, medical, and commercial sites, including the following:

Papermaking
Metallurgy
Medical use
Glass manufacturing
Multiple food and beverage industries
Chemical oxidation practices and processes
Commercial fish farming
Sewage plants and wastewater treatment plants
Various different forms of mining
Gasification processes

And more. Get in touch to find out how IATT can supply and install Oxygen Industrial Oxygen Generators anywhere in the UK thanks to our tactically placed team of specialist installers and staff.

If you have any queries about the application or specific usage of any of our products, including lab gas generators, laboratory nitrogen generators, or anything else listed on our site, then please do not hesitate to get in touch.

Our team are vastly experienced and highly knowledgeable, and we are experts in the industry. We can answer any technical queries surrounding the various products and services we provide, from industrial oxygen generators to nitrogen generators, compressed air dryers and more.

Independent Air Treatment Technology Ltd. (IATT) is a British company with our head office in North East England. We provide a national coverage of fully factory trained engineers strategically located throughout the UK that specialise in compressed air and gas generation technology. We provide services to the manufacturing, food, beverage, chemical, laboratory, pharmaceutical, brewing and process industries – if you use compressed air then IATT can Supply, Install and Service your equipment.

IATT have an enviable reputation for Service Excellence and rapid response to customer needs – we are renowned for our independent approach.

Our independence ensures we always select and supply the very best products and equipment solutions to suit your specification for Compressed Air Filtration, Air and Gas Treatment, Refrigeration Dryers, Desiccant Dryers ,Water Chillers and Onsite Nitrogen Generation Technology.

Click Here: Breathing Air Systems 

LEAVE A REPLY

Please enter your comment!
Please enter your name here