How to Maintain Your Log Splitter?

Log splitters come out to be handy as they load off the burden to split the logs into a distinct measurable set of pieces. The most significant factor of using a log splitter is, you get improved log splitting with minimum effort and exhaustion within a short time frame. Not only these tools are suitable for commercial use, but many of the homeowners also prefer using this tool for tearing wood for their aesthetic fireplace.

Now, in order to keep your work in a certain flow, these tools require appropriate maintenance to prevent any disorder and malfunction. Proper maintenance and cleaning with a check on any damage keep your tool in excellent working condition. Here are some useful tips so you may enjoy your log splitter for quite a long while.

Measures for Safe Maintenance

A log splitter is a powerful machine and not for the degrading, but a slightly mishandling can leave one with the critical injuries.

  • One should be well equipped for performing maintenance on the machine
  • Make sure that the splitter is powered off.
  • Wait for some time to cool it down before commencing the maintenance procedure.
  • The spark plug cable must be detached and grounded.
  • Make sure the pressure of the hydraulic is completely released before beginning work.

Use Proper Safety Apparel

Get ready for the maintenance procedure with appropriate safety apparel. You must be wearing gloves, safety glasses, and long boots to keep yourself safe throughout the process. Wearing a proper outfit will keep you safe from all the debris, dirt, and discharge of fluid that may release during the process.

Check Leakage of Hydraulic Fluid

Log splitters use hydraulics to tear the wood. The elements that lead in the oil from pump to the supply valve to generating pressure is called hose pipe.

The fluid within the pipes moves at very high pressure. If you think there is a leak somewhere in the hose, do not attempt to check the piping with your hand. The high-pressure liquid streaming from a small hole is powerful enough to pierce the skin.

How to Check for the Leakage?

Use a piece of hard paper like a playing card or a sheet of cardboard to look for leaking hydraulic fluid. Gently move the card around the piping to find out where the flow is. You will know where the leak is once the card reveals traces of oil. Replace the hoses instantly with a new one.

Check the Hydraulic Fluid Quality

Inspect the liquid tank for traces of water at frequent times. With continuous use of the log splitter, water may gather in the fluid.

Tainted hydraulic fluid will affect the log splitter’s power and efficiency. You might not notice it at first, over time, the tool will degrade gradually. If you found smoky grey discolored liquid, replace it with fresh recommended hydraulic fluid.

Maintaining the Log Splitter

After checking certain problems that might come in the log splitter, now, the job falls to maintaining the machine. The cleaning and the maintenance process are keenly important for the log splitter, as it will help to increase the life expectancy, and sustain the efficiency. We have described the method is thorough steps, enlisted as follow;

  • Refill Hydraulic Fluid Reservoir
  • Release Air from the Hydraulic Cylinder
  • Lubricate the Ram
  • Check the Pump
  • Examine the Pull Cable
  • Inspect the Engine
  • Indicators of Problems
  • Clean the Log Splitter Regularly

Whilst the maintenance process, we have likewise carved out the certain best log splitter under $1000, working in the efficient potential, as the features you should look in for the compatibility are listed;

Best Log Splitter Under $1000

Refill Hydraulic Fluid Reservoir

If hydraulic fluid is short in the log splitter, it will function with noticeably decreased power. To fill the required quantity of hydraulic fluid, take out the oil filling cap, and pour the hydraulic fluid in the reservoir to the mark.

Release Air from the Hydraulic Cylinder

When the required quantity of hydraulic fluid is filled, you’ll have to remove the captured air from the cylinder. Expand the piston rod to its maximum length and remove the oil filling cap. Then weave the release screw in an anticlockwise direction. The piston rod will move back into the cylinder will drive the air out of the cylinder.

Lubricate the Ram

The ram is another important part of the log splitter. Keep the ram fully greased up. Keep every inch of it greased, because a dry ram will quickly be got rusted.

Take Special Care of the Rust

A rusted ram can damage the hydraulic seal, and you do not want this. If you find rust forming, clean it with sandpapers, and cover the ram with grease.

Check the Pump

Regularly inspect the pump for some loose play in the coupling. Too much play can stop the pump from working accurately. If it begins to create a mess, you need to replace the bearings. Loose play in the coupling and central spindle is often due to broken bearings.

Examine the Pull Cable

Draw the pull cable out and look over for wear and tear. Cables do fray and get weaker with time. When you notice considerable damage to the pull cable, replace the worn one with a new cable. Then you’ll be satisfied it’s ready to go again when you need it.

Inspect the Engine

In case a log splitter is driven by an engine, keeping it in working condition is critical to its functionality. Confirm that the oil is clean and full, and every valve and the crankshaft is completely lubricated. See if the carburetor, which is responsible for the combustion process inside the engine, is in good condition.

Spark Replacement

Replace the spark plug if required, then check whether the electrodes are in excellent condition. Keeping the engine in a properly maintained state is as important as a well-kept hydraulic system.

Clean the Log Splitter Regularly

Be sure to clean the machine frequently to remove grease, oil, and debris. Make sure the machine is always powered off before you perform any clean-up. Also, take out debris around the machine as you work to prevent anything from getting stuck in the log splitter during the work process.

Indicating the Problems

As you start your log splitter, pay attention to the excessive vibration or unusual sounds. Vibration is a certain indicator that something’s going wrong.

The main sources of unnecessary vibration are the engine and the hydraulic pump. So, if you feel your log splitter vibrating too much, it could point towards a problem with one of these two components.


A log splitter is an important tool when you have a rush of logs been waiting to be split up. The machine loads off the human labour of using axe and apply mechanical energy to cut up the logs much quickly. As for the machine to work in a convenient stature, proper maintenance is required. Here, we have listed the steps one required to follow in order to maintain the log splitter. The recommendation are not limited by the maintenance steps but also describes the way to indicate certain problems and what would be counterparts. On the side note, the measurements you need to give in a look before getting to the cleaning process are likewise listed.


Please enter your comment!
Please enter your name here