There is usually a complicated and more accessible way to complete most home projects. The easier route does not automatically imply inferior results. This approach also applies to paint house on the outside.
You will profit from time-saving advice if you paint your own house rather than employing professional house painters. These hacks, tips, and suggestions will help you paint your home quickly, effectively, and with minimal effort.
1. Quickly and painlessly clean your home.
Before painting, most properties will need to be cleaned down. When you wipe a white cloth across the side of your house, you’ll see years, if not decades, of accumulated grey soot and dust. It is still advisable to wash down the house even in the most frantic painting operations.
Hand-washing your house is the most effective and time-consuming method of cleaning. But what’s the bare minimum you can get away with?
If you have a power washer, use it to clean the house twice. Clean it with a soapy solution first. Second, give it a good rinsing with fresh water.
If you don’t have a pressure washer, the next best thing is to hose it down thoroughly.
The big, visible rubbish (spider webs, wasp’s nests, leaves) should be removed first, followed by the thin soot and dust.
2. Keep the color of your house the same or darker.
When you change the color of your house’s exterior, you add extra work to your plate. When the new coat is lighter than the old coat, the quantity of work required increases dramatically. Even if you only use one layer of paint, the previous color will appear in certain places. However, those sections will merge if you use the same hue throughout.
Find a patch with peeling paint, rip it off, and take it to a paint store if you don’t know the current house color. Remove a painted component, such as a dryer vent or a molding strip, if there is no flaking paint. Usually, the paint store can match the existing color.
Consider making the following shade darker than the current color if you want to change your paint.
It’s easier to apply just one coat if you use the same or darker hue.
3. Only prime when necessary.
Is it necessary to apply a full coat of primer to your home before painting? Perhaps not.
There should be no need to use a primer if the paint is in good condition and you’re re-painting the same color.
On the other hand, problem regions will necessitate using a primer. Priming is required for bare wood, wood filler, and rust-stained areas. If you have essential places, a quart of exterior-grade primer will suffice. Priming should be applied to unpainted and unprimed sections only, not the entire home.
The prepped areas will show through the paint, so keep that in mind. Unless your topcoat is entirely white, you may need to apply an additional coat of paint to cover the lighter-colored primer.
4. Reduce the amount of paint scraping.
Scraping paint is a painting technique that is universally despised. After a couple of hours of scraping paint, you’ll desire the comparably easier brushing, rolling, or spraying chores.
One issue with paint scraping is that it always appears that one portion leads to another. You can probably leave it alone if the paint’s edges stay down. The new color will assist keep the edges in place by sealing them. Scrape until you hit a somewhat firm edge, then come to a halt there. You can browse for contractors in London if you need this type of service.
It’s time to employ home painters or a crew to remove the paint mechanically if you need to remove all the color from the house.
5. Roll out the paint on the Flat Surfaces.
Rolling Paint allows you to cover huge areas quickly. The problem is that many varieties of siding aren’t designed to be rolled. Painting shiplap siding with a paint roller, for example, is difficult (wide shiplap, though, can be painted with a roller).
Cover them fast using a paint roller and an extension pole if your house has flat siding or even enormous flat areas.
6. Large Areas or Detailed Areas to Spray.
Paint spraying is a time saver and a time-waster at the same time. On the one hand, spraying allows you to cover huge areas or areas with many details fast and efficiently.
Paint spraying, on the other hand, necessitates extensive planning. Within 20 feet, all sections of the non-paintable surface should be covered. If you have delicate foliage or grass, such areas should be covered. You can spray without laying down a cover if it’s late in the summer and you’ve given up on the grass for the season.
If your home has a lot of architectural characteristics, the time you spend painting will pay off. The brushwork is always slow, and details usually mean brushwork. However, this is strongly advised if you can mask off non-painted portions quickly and easily. For painting large areas, you can contact contractors in London.
7. Don’t spend as much time cleaning roller covers or brushes.
After a long day of painting, all you want to do is settle down and drink something cold. Your brushes and roller coverings are the last things you want to clean. On the other hand, cleaning is critical to maintaining your painting tools in good working order for as long as possible.
Purchase low-cost, high-quality paint roller coverings and dispose of them at the end of each painting session. Higher-quality coverings are advised for interior painting, where the work will be scrutinized. Exterior painting is better suited to low-cost roller coverings.
When it comes to painting brushes, it’s essential to invest in high-quality brushes and take good care of them. Cleaning your nice brushes using a paintbrush comb and water is the best way. Brush combs reduce brush cleaning time by at least half. They aid in the removal of any remaining paint from between the bristles.
