Mac and Windows users can follow this guide to set up a Canon printer. When firing the cannon, what is the best way to get it started?

https //ij.start.cannon

ij.start.cannon

In this essay, we went through how to install a Canon printer configuration using the https //ij.start.cannon approach in detail. For both Windows and Mac operating systems, we illustrated how to set up a wired and wireless connection using the appropriate configuration options.

Before you may begin setting up IJ, you must first complete the tasks listed below. Canon Photocopier (Beginner’s Guide)

  1. Before beginning the setup procedure, make sure you have the model number of your printer readily available.
  2. Check if you have enough available storage space on your device to accommodate the driver installation.
  3. Please double-check to ensure that the printer is correctly connected to the power socket.
  4. Verify that your device is connected to the internet by doing a check.

Wireless Canon Printer Setup for Windows -ij.start.cannon User Manual -ij.start.cannon

  1. To begin, navigate to https //ij.start.cannon‘ and download and install the printer driver for your printer model (if necessary).
  2. To check that the power switch is correctly installed in your Canon printer, turn it on and press the power button.
  3. Then, open the driver setup file that you downloaded and navigate to the page where you may select “Wireless Setup.”
  4. After you’ve picked the wifi option, go back to the Canon printer’s interface and hit the WiFi configuration button to complete the process.
  5. Once you’ve made your selections for the device settings, click OK.
  6. Then, navigate to Device Settings>LAN Settings and press the ‘OK’ button to save your changes.
  7. LAN Settings>Wireless Lan Setup, and then hit the ‘OK’ button to complete the configuration. Your printer will now initiate a search for an access point.
  8. Check to see sure your WiFi router is operational. The WiFi flashbulb on the printer will now begin to blink.
  9. Following that, the screen will give a list of available networks. Choose your WiFi network from the drop-down menu and click the ‘OK’ button.
  10. It will now prompt you for your WPA/WEP password (WiFi password). Fill up the blanks with your correct password, then click the ‘OK’ button to proceed.
  11. Your printer will automatically connect to the WiFi network within a few seconds.
  12. By following the steps outlined above, you will be able to quickly and easily perform the https //ij.start.cannon wireless setup on your Windows-based personal computer.

Follow the procedures outlined below to ensure that your printer is successfully installed on your Windows system:

  1. From the ‘control panel,’ select ‘devices and printers’ from the drop-down menu.
  2. Check to see if your printer is displayed with a green checkmark on the following screen. If there isn’t one already, you’ll have to manually add one by selecting the ‘Add printer’ option.
  3. On the screen, you will now see a list of all of the printers that are currently available. Choose your Canon printer from the drop-down selection that appears.
  4. Next, wait a few seconds for your printer to be recognized by the computer.
  5. Adding a printer will be shown by a green checkmark once it has been completed.

Installing an ij.start.cannon printer on Windows using a USB cable – ij.start.canon.com/ Using a USB Cable to Install an ij.start.cannon Printer on Windows

  1. To begin, go to https //ij.start.cannon and download and install the Canon printer driver from the site listed above.
  2. Connect the printer to the Windows computer utilizing a USB cord.
  3. By searching for the ‘Control panel’ in Windows, you may open it from the ‘Run’ dialogue box by selecting it from the list.
  4. Select ‘Devices and Printers’ from the drop-down menu. In the vicinity of your printer, a green checkmark should now show.
  5. If your printer isn’t shown, click the ‘Add printer’ button to manually add it to the list.
  6. Finally, your printer has been added to the list and is ready to be used.

How to Setup a Canon Printer on a Mac Using the ij start cannon command-line tool?

  1. Before continuing, make sure you have downloaded and installed the Canon https //ij.start.cannon driver from https://www.canon.com/ijsetup.
  2. The processes outlined in the first section of this article should be followed to connect your Canon printer to the same WiFi network as your smartphone.
  3. Then, from the ‘Apple’ menu, choose ‘System Preferences’ from the drop-down list.
  4. Make a selection in the System settings box by clicking on the printer-shaped icon marked “Printers and scanners.”
  5. An additional pop-up window will appear once you click on the “+” sign located towards the bottom left-hand corner of the screen.
  6. If your printer is already connected to the network, the name of the printer will display in the left-hand pane of the window. To begin the installation process, simply click on the icon in question.
  7. When the operation is complete, your printer will be tagged with a green checkmark, indicating that it is ready to be used.

Conclusion

We hope you found this information to help set up your printer with Canon https //ij.start.cannon. The processes described here will allow you to configure your printer on both Windows and Mac devices using the https //ij.start.cannon setup web-based configuration tool.

 

LEAVE A REPLY

Please enter your comment!
Please enter your name here