Painting the basics of home | Paint


Repainting your house is a difficult job. Some rely on paint companies to do the job for you. Hiring a house painting service can also cost you. But if you plan to paint it yourself, you may want to consider the basics; and consider the time and effort you will put into painting your home.


Many types of paint are available today, some offer different surface finishes, others are designed for a particular application. Choosing the right type of paint can seem confusing at first, but once you’ve mapped out what theme you want to paint your home with and figured out what job and finish you want, the choice is pretty easy.

There are two paint bases for your home: solvent-based (oil or alkyd) and water-based (latex). Oil-based paints dry slowly, usually up to 24 hours. The best cleaning for an oil-based paint is a white spirit or paint thinner. The advantage of latex paints is that it dries relatively quickly, but is undesirable in hot weather or in direct sunlight. The best cleaning for latex paints requires only soap and water. So if you are painting the inside of your house it is recommended to use water-based paints while solvent-based paints are recommended for painting the outside of your house.

There are several types of water- or solvent-based paints that produce different finishes measured by their gloss factor. “Gloss” is a term used to describe the amount of reflection of light the painting has. A lower gloss for interior or exterior means it is less resistant to staining.

· A glossy finish is easy to clean and more resistant to scratches. This is ideal for areas that are in constant use. Most gloss paints are recommended for use on woodwork, baseboards, kitchen and bathroom walls, door frames, and window frames. However, the disadvantage of using glossy paints is the noticeable imperfections on the wall surface.

· A high gloss paint is highly reflective and works well to accentuate details such as accents and trim. They are also the best choice for doors and cabinets or any area that gets a lot of abuse.

· Semi-gloss paints are very similar to glossy plates, except they have a lower gloss. Semi-gloss is also suitable for areas with high humidity (best for children’s rooms) and can be used for trim and siding. These paints guarantee maximum durability.

· Eggshell paints provide a smooth, low-gloss finish. Soft, low gloss paints that are ideal for living rooms, dining rooms, bedrooms, and dens. It is washable and ideal for bedrooms, hallways, home offices, and family rooms.

· Satin paints offer a good combination of moderate gloss and are easy to clean. These paints go a step beyond the eggshell in scrubbing power. They work and look great in almost any room.

· Flat paints (matte paints) do not reflect and are always a good choice for large walls and ceilings. Flat paint hides imperfections on wall surfaces and splatters well during application. Flat paints are the best choice for vinyl and aluminum siding that is scratched or dented because they hide imperfections and splashes when applied. These paintings are ideal for low-traffic areas such as formal dining rooms and master bedrooms.

Specialty paints have been innovated from different consumer perspectives and a gloss paint technology that enables specific paints for specific needs.

· The soffits are specially designed for ceilings. They are usually more resistant to splashes.

Primer paints can be oil or water-based and are used to seal unpainted surfaces to prevent paint from settling in. The correct type of primer should be used for the surface to be painted: wood, metal, plaster or tile. There are some “all purpose primers” available that are designed for two or more of these surfaces.

· Anti-fog paints are used for areas with humid conditions such as kitchens and bathrooms. This paint is generally formulated to prevent condensation and often contains fungicide.

· Flame-retardant paints are not completely resistant to fire, but their flame-retardant composition prevents fire from spreading quickly.

It is also important that you use a primer before painting your room. A primer helps the paint adhere to the surface and provides a uniform appearance. Using a primer is a must if you are painting over new wood, bare wood, drywall, or painting over existing bright or dark colors.

But before you do this, you need to know the condition of the surface you want to paint. Regardless of whether the base coat is oil or latex, you will need to dull the gloss paint by sanding it or removing the gloss with a chemical to remove the gloss. If you don’t dull the gloss paint, the second coat will scratch and not stick to the base coat as it dries.


If you want to change the mood of your room, a painting company in Dubai is an excellent option. When painting interiors, use paint that dries faster and doesn’t have a strong odor that stays where your kids can smell it.

Painting the interior of your home requires careful estimation, visualization and preparation. Once you’ve chosen the theme for your rooms and purchased the necessary work supplies (paints, brushes and rollers, extension handles, paint tray, paint stirrer, hanging clothes, ladder, painter’s tape, etc.), follow these tips to paint the interior of the house:


· Always provide adequate ventilation when painting indoors. Wear a respirator or respirator if you cannot provide adequate ventilation in the work area.

· Keep paint or solvent containers closed when not in use.

· Keep paint products out of the reach of children.

· Avoid direct skin contact.

· Always read the instructions on the packaging (label).


· Remove as much furniture from the room as possible or group the heaviest and most delicate accessories and cover them with a cloth.

· Provide adequate lighting to have a good view of paint imperfections.

· Remove the switch plates.

· Repair holes and cracks in surfaces to be painted with premixed sealant. After the paste has dried, sand the patched areas.

· Dust and wash ceilings, walls, baseboards, windows and door trim.

· Can be painted over on clean, sturdy wallpaper, but is best removed in most cases. Paint on wallpaper can peel off.


· If you are painting the entire room, it is best to paint the ceiling first.

· When using a paint roller, move your arms in a series of diagonal stripes (forming a letter M). Fill open areas by cross lamination.

· If using a paintbrush, apply the paint in short strokes to the unpainted area, also known as “wet to dry”. Then brush the area you just painted again to get a smooth surface.

· If you are painting the ceiling, remove light bulbs, chandeliers, fluorescent lights and fixture covers.

· Paint the trim first, including the edges around the ceiling, trim and trim.


· Paint around the trim first, including the trim around the ceiling.

· When painting with a glossy finish, make final strokes away from the light source in the room. Small ridges left by a brush will not be as pronounced. Use the same “wet to dry” painting method.


· Check the joinery for damage. if there is one, apply wood putty, dry overnight, sand to remove roughness and apply sealer before painting.

· If you use the same paint on walls and woodwork, paint the woodwork as you find it. If it’s a different color or higher gloss, wait for the walls to finish.

· Paint double sash windows from the wood between the panels and then out. We use the same technique for casement windows, but keep the windows slightly open until the paint dries.

· For panel doors, first paint the cast cladding and then the individual panels. Paint from the center out. When the panels are ready, paint the vertical and horizontal flat panels.

· Use painter’s tape or a painter’s shield to keep paint off windows. Do not use masking tape or duct tape. By using painter’s tape or painter’s shield, you can cover areas for up to 3 days.

· First paint the skirting boards at the top edge, then the bottom along the floor. Paint the middle section last.

· Remove cabinet doors and drawers and paint flat surfaces first. Paint inside the edges and then move to the outside surfaces.


· If there are paint droplets on your floor, don’t let them stay there. The longer the paint cures, the harder it becomes lighter. Use a cloth with soapy water or a solvent to clean.

· Use a razor scraper or putty knife to remove larger paint drips that have dried.

· Use a scraper to trim around window glass.

· Wash and dry brushes and rollers. Store them according to the brand’s recommendation, not all brushes have the same type of bristles, nor do rollers have the same material.

· Clean the from the edge of the can. Beat the lids of the containers well with a hammer and a block of wood.

· Store solvent-based paint cans upside down to prevent skin from forming.

· Store your paintings at normal or room temperature. Never place the paintings in extremely hot or cold rooms.

· Each US state or community/province differs in how they dispose of cans. Check local environmental, health, and safety laws.


Please enter your comment!
Please enter your name here